Roses - 16oz UV DTF CUP WRAPS

This listing includes one (1) premium UV DTF adhesive wrap for a 16oz glass cup (cup is not included)

• Size of cup wraps: 9.3" x 4.1"
• Easy application - Carefully apply & Peel!
• Waterproof
  
• No heat press needed
• May be applied to any hard surfaces
• Original Film

Application Instructions: 

1. Ensure the glass/plastic/surface is free from any hand oils or dirt and is completely dry.

2. Measure and trim down wrap to remove excess material to your preference.

3. Peel ¼ of the design transfer off the white backing, starting from the right side. Cut ¼ of the white backing.

4. Place the design transfer on the glass/plastic/surface, starting from the right side- ensuring the design is straight and positioned correctly. (NOTE: Adhesive is very strong that means once it’s placed it is very difficult to take off)

5. Slowly start working from the right to the left removing the white backing and pushing out any air bubbles. We recommend using a hand applicator squeegee to remove any excess bubbles.

6. Rub heavily all over the design with your fingers. The more you rub, the better, to ensure that the design is fully seated on the glass/plastic/surface.

7. Carefully and slowly peel off the clear film, and you're done!😊

For video tutorial, visit our Instagram @Tokimekushop

UV DTF Care Instructions:
Gentle hand wash only.
Do not soak.
Not dishwasher safe.
Not microwave safe.
Do not use harsh chemicals.
Avoid extreme heats.

Disclaimer:

We are not responsible for any application mishaps.

Please note that not all brands of cups have the exact same measurements. 

Our wraps have been measured to fit the 16oz Libbey glass cups. Adjustment trimming may be necessary.

** All sales are final **